background image

44

SPEKTRUM DX6 • TRANSMITTER INSTRUCTION MANUAL

EN

What this Warranty Covers

Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that 

the product purchased (the “Product”) will be free from defects in 

materials and workmanship for a period of 1 years from the date of 

purchase.

What is Not Covered

This warranty is not transferable and does not cover (i) cosmetic 

damage, (ii) damage due to acts of God, accident, misuse, abuse, 

negligence, commercial use, or due to improper use, installation, 

operation or maintenance, (iii) modification of or to any part of the 

Product, (iv) attempted service by anyone other than a Horizon 

Hobby authorized service center, (v) Product not purchased from 

an authorized Horizon dealer, or (vi) Product not compliant with 

applicable technical regulations. 

OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON 

MAKES NO OTHER WARRANTY OR REPRESENTATION, AND 

HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, 

INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES 

OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR 

A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES 

THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL 

SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER’S 

INTENDED USE. 

Purchaser’s Remedy

Horizon’s sole obligation and purchaser’s sole and exclusive remedy 

shall be that Horizon will, at its option, either (i) service, or (ii) 

replace, any Product determined by Horizon to be defective. Horizon 

reserves the right to inspect any and all Product(s) involved in a 

warranty claim. Service or replacement decisions are at the sole 

discretion of Horizon. Proof of purchase is required for all warranty 

claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS 

WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY. 

Limitation of Liability

HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, 

INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR 

PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS 

OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, 

TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY 

OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE 

POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the 

liability of Horizon exceed the individual price of the Product on 

which liability is asserted. As Horizon has no control over use, setup, 

final assembly, modification or misuse, no liability shall be assumed 

nor accepted for any resulting damage or injury. By the act of use, 

setup or assembly, the user accepts all resulting liability. If you 

as the purchaser or user are not prepared to accept the liability 

associated with the use of the Product, purchaser is advised to 

return the Product immediately in new and unused condition to the 

place of purchase.

Law

These terms are governed by Illinois law (without regard to conflict 

of law principals). This warranty gives you specific legal rights, 

and you may also have other rights which vary from state to state. 

Horizon reserves the right to change or modify this warranty at any 

time without notice.

WARRANTY SERVICES
Questions, Assistance, and Services

Your local hobby store and/or place of purchase cannot provide 

warranty support or service. Once assembly, setup or use of the 

Product has been started, you must contact your local distributor 

or Horizon directly. This will enable Horizon to better answer your 

questions and service you in the event that you may need any 

assistance. For questions or assistance, please visit our website 

at www.horizonhobby.com, submit a Product Support Inquiry, or 

call the toll free telephone number referenced in the Warranty and 

Service Contact Information section to speak with a Product Support 

representative. 

Inspection or Services

If this Product needs to be inspected or serviced and is compliant 

in the country you live and use the Product in, please use the 

Horizon Online Service Request submission process found on our 

website or call Horizon to obtain a Return Merchandise Authorization 

(RMA) number. Pack the Product securely using a shipping carton. 

Please note that original boxes may be included, but are not 

designed to withstand the rigors of shipping without additional 

protection. Ship via a carrier that provides tracking and insurance 

for lost or damaged parcels, as Horizon is not responsible for 

merchandise until it arrives and is accepted at our facility. An Online 

Service Request is available at http://www.horizonhobby.com/

content/_service-center_render-service-center. If you do not have 

internet access, please contact Horizon Product Support to obtain 

a RMA number along with instructions for submitting your product 

for service. When calling Horizon, you will be asked to provide your 

complete name, street address, email address and phone number 

where you can be reached during business hours. When sending 

product into Horizon, please include your RMA number, a list of the 

included items, and a brief summary of the problem. A copy of your 

original sales receipt must be included for warranty consideration. 

Be sure your name, address, and RMA number are clearly written 

on the outside of the shipping carton. 

NOTICE: Do not ship LiPo batteries to Horizon. If you have 

any issue with a LiPo battery, please contact the appropriate 

Horizon Product Support office.
Warranty Requirements

For Warranty consideration, you must include your original sales 

receipt verifying the proof-of-purchase date. Provided warranty 

conditions have been met, your Product will be serviced or replaced 

free of charge. Service or replacement decisions are at the sole 

discretion of Horizon.

Non-Warranty Service
Should your service not be covered by warranty, service 

will be completed and payment will be required without 

notification or estimate of the expense unless the expense 

exceeds 50% of the retail purchase cost.

 By submitting the 

item for service you are agreeing to payment of the service without 

notification. Service estimates are available upon request. You must 

include this request with your item submitted for service. Non-

warranty service estimates will be billed a minimum of ½ hour of 

labor. In addition you will be billed for return freight. Horizon accepts 

money orders and cashier’s checks, as well as Visa, MasterCard, 

American Express, and Discover cards. By submitting any item 

to Horizon for service, you are agreeing to Horizon’s Terms and 

Conditions found on our website http://www.horizonhobby.com/

content/_service-center_render-service-center. 

ATTENTION: Horizon service is limited to Product compliant 

in the country of use and ownership. If received, a non-

compliant Product will not be serviced. Further, the sender 

will be responsible for arranging return shipment of the 

un-serviced Product, through a carrier of the sender’s 

choice and at the sender’s expense. Horizon will hold non-

compliant Product for a period of 60 days from notification, 

after which it will be discarded.

1-YEAR LIMITED WARRANTY

Summary of Contents for DX6















































Reviews: