6
Radiants
Grate
Knob
Tray
Conversion
2. Pull-out and remove all the knobs. Remove the Tray, Grates
and Radiants.
3. Remove the screws of the control panel.
4. Remove the nuts for U Burners.
Nut
U Burner
5. Remove the U Burners.
6. Remove the orifice and replace it. Use a 1/2” spanner. See the list of
orifice numbers for the appropriate gas type.
These instructions are for the conversion from Natural Gas to Propane (L.P.)
on all models. The conversion should be done before connecting the unit to
the gas supply.
Units are shipped from the factory equipped for use on natural gas. Orifices
necessary for Propane (L.P.) are included with the unit
.
1. Shut-off the main isolation gas valve and
follow the lock-out/tag-out procedure.
Screw
Main Burner
Valve
Pilot Valve
Orifice
