background image

Function

1

LED

2

Right Trim

3

Right Knob

4

Switch E

5

Switch G

6

Switch F

7

Throttle Adjustment (Mode 1,3)

Throttle Adjustment (Mode 1,3)

8

Mode Change, Gimbal 

Centering Screw

9

Throttle/Aileron (Mode 1)

Elevator/Aileron (Mode 2)  

Throttle/Rudder (Mode 3)

Elevator/Rudder (Mode 4)

10 Left/Right Gimbal Stick 

Tension Adjustment

11 Up/Down Gimbal Stick 

Tension Adjustment

12 Elevator Trim (Mode 2, 4)

Throttle Trim (Mode 1, 3)

Function

13 Aileron Trim (Mode 1,2)

Rudder Trim (Mode 3,4)

14 Neck Strap Mount
15 Speaker Grill
16 Touchscreen LCD

17 Rudder Trim (Mode 1,2)

Aileron Trim (Mode 3,4)

18 Throttle Adjustment (Mode 2,4)

Throttle Adjustment (Mode 2,4)

19 Elevator Trim (Mode 1,3)

Throttle Trim (Mode 2,4)

20 Mode Change Gimbal 

Centering Screw

21

Elevator/Rudder (Mode 1)

Throttle/Rudder (Mode 2)

Elevator/Aileron (Mode 3)

Throttle/Aileron (Mode 4)

22 Left/Right Gimbal Stick 

Tension Adjustment

23 Up/down Gimbal Stick  

Tension Adjustment

Function

24 Switch C
25 Switch B
26 Switch D
27 Switch I
28 Gimbal travel limiter covers
29 Left Trim
30 Power Button
31 Antenna 1
32 Switch A
33 Left Lever
34 Serial Interface Port
35 Audio Jack
36 Battery Cover
37 Right Lever
38 Switch H
39 Handle/Antenna 2
40 Memory card port
41 USB/Charging port

TransmiTTer FuncTions

charging

Powering uP/down The iX12 TransmiTTer

The first time you charge the transmitter, the charge time may be 15-20 

hours. Always charge the transmitter on a heat-resistant surface.

charging:
1. 

Connect the power supply to a power outlet using the appropriate adapter 

and the Micro USB cable to the charge port on the transmitter as shown.

2. 

A Blue LED will flash while charging. Also a fast press of the power switch 
will bring the Charge Battery icon to the color touch screen display.

3. 

When the system is powered ON, charging is complete when the blue 

flashing LED stops. Disconnect the USB cable once charging is complete 

and disconnect the power supply from the power outlet.

cauTion: 

Never leave a charging battery unattended.

cauTion: 

Never change the low voltage limit for Li-Ion batteries 

below 3.3V. Doing so could over-discharge the battery and damage 

both battery and transmitter.

cauTion: 

Never charge the battery outside of the transmitter due 

to the battery monitoring system not recognizing the 

charge of the battery when it is not charged inside the 

transmitter. This can cause the system to give false low battery warnings.

• Always ensure all batteries have been properly charged 

prior to using the model.

• Always check all servos and their connections prior to 

each run.

• Never operate your model near spectators, parking 

areas or any other area that could result in injury to 

people or damage of property.

• Never operate your model during adverse weather 

conditions. Poor visibility can cause disorientation and 

loss of control of your model.

• Never point the transmitter antenna directly toward the 

model. The radiation pattern from the tip of the antenna 

is inherently low.

• If at any time during the operation of your model you 

observe any erratic or abnormal operation, immediately 

stop operation of your model until the cause of the 

problem has been ascertained and corrected.

• Failure to exercise caution while using this product 

and comply with the following warnings could result in 

product malfunction, electrical issues, excessive heat, 

FIRE, and ultimately injury and property damage.

• Read all safety precautions and literature prior to use 

of this product

• Never allow minors to charge battery packs

• Never drop charger or batteries

• Never attempt to charge damaged batteries

• Never attempt to charge a battery pack containing 

different types of batteries

• Never charge a battery if the cable has been pinched 

or shorted

• Never allow batteries or battery packs to come into 

contact with moisture at any time

• Never charge batteries in extremely hot or cold places 

(recommended between 50–80˚ F or 10–27˚ C) or 

place in direct sunlight

• Always disconnect the transmitter after charging, and 

let the charger cool between charges

• Always inspect a new battery before charging

• Always terminate all processes and contact Horizon 

Hobby if the product malfunctions

• Always keep batteries and charger away from any 

material that could be affected by heat (such as 

ceramic and tile), as they can get hot

• Always end the charging process if the charger or 

battery becomes hot to the touch or starts to change 

form (swell) during the charge process

safety precautions

charging warnings

The iX12 features a push button ON/OFF switch.

1. 

To power on the transmitter, push and hold the Power button for several seconds until 

the LCD screen displays the start up screen. Similar to other smart devices, startup takes 

~1 minute at which time the Spektrum Airware™ app launches automatically and takes 

approximately 1 1/2 minutes to fully launch.

2. 

To power down the transmitter, push and hold the Power button for several seconds until 

the Power Off / Reboot prompt shows on the screen. Press Power Off to shutdown.

Tip

Pressing the Power button once will put the display to sleep but the radio will continue to transmit normally. Press the 

power button again to wake up the screen.
Double pressing the Power button will open a window allowing you to select RF On/Off, LCD On/Off, or press and hold 

to put both RF and LCD into sleep mode.
It is recommended you use the sleep mode rather than turning the system Off on flying days.

support Videos:  

For helpful videos on programing the Spektrum™ iX12 

transmitter and other Spektrum Transmitters go to 

https://www.spektrumrc.com/

age recommendation: not for children under 14.

This is not a toy.

noTice: 

This product is only intended for use with 

unmanned, hobby-grade, remote-controlled vehicles and 

aircraft. Horizon Hobby disclaims all liability outside of the 

intended purpose and will not provide warranty service 

related thereto.

warranTY regisTraTion

Visit 

www.spektrumrc.com/registration

 today to register your 

product.

en

noTice

All instructions, warranties and other collateral 

documents are subject to change at the sole discretion 

of Horizon Hobby, LLC. For up-to-date product literature, 

visit horizonhobby.com and click on the support tab for 

this product. 

meaning of special Language

The following terms are used throughout the product 

literature to indicate various levels of potential harm when 

operating this product:

warning:

 Procedures, which if not properly followed, 

create the probability of property damage, collateral 

damage, and serious injury OR create a high probability of 

superficial injury

cauTion:

 Procedures, which if not properly followed, create 

the probability of physical property damage AND a possibility 

of serious injury.

noTice:

 Procedures, which if not properly followed, create 

a possibility of physical property damage AND a little or no 

possibility of injury.

warning:

 Read the ENTIRE instruction manual 

to become familiar with the features of the product 

before operating. Failure to operate the product correctly 

can result in damage to the product, personal property and 

cause serious injury.
This is a sophisticated hobby product. It must be operated 

with caution and common sense and requires some basic 

mechanical ability. Failure to operate this Product in a safe 

and responsible manner could result in injury or damage to 

the product or other property. This product is not intended 

for use by children without direct adult supervision. Do not 

attempt disassembly, use with incompatible components 

or alter product in any way without the approval of Horizon 

Hobby, LLC. This manual contains instructions for safety, 

operation and maintenance. It is essential to read and 

follow all the instructions and warnings in the manual, prior 

to assembly, setup or use, in order to operate correctly and 

avoid damage or serious injury.

54003
© 2017 Horizon Hobby, LLC.
DSMX, the DSMX logo, Spektrum AirWare and the Horizon Hobby logo are trademarks 
or registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with 
permission of Bachmann Industries, Inc.
Android is a trademark of Google Inc. The Bluetooth

®

 word mark and logos are registered 

trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Horizon Hobby is 
under license. The WiFi logo is a registered trademark of WiFi Alliance.
All other trademarks, service marks and logos are property of their respective owners. 
EU patent 6007706. Other patents pending. 

 

Created 11/17

iX12 

iX12 

12-Channel 2.4GHz DSMX

®

 Aircraft System

12-Channel 2.4GHz DSMX

®

 Aircraft System

3

1

30

36

34

35

40

41

33

32

31

39

38

37

28

2

29

4
5
6
7
8
9

10
11
12
13
14
15

27
26
25
24
23
22
21
20
19
18
17
16

Summary of Contents for iX12









Reviews: