PLAYBACK
44
Continuous (Loop) Playback
To activate this mode, at first, you should set time tags within which you wish
to play a record continuously.
Press the
button to set the start time tag, e.g.
00:00:02
Press the
button to set the end time tag, e.g.
00:00:44
If you press the
or
button twice during the playback, it will set new time
tags.
When you press the
or
button for more than 1 second, it will shift the
playing to the start or end tagged positions correspondingly.
If you set only the start time tag, the recording will be played until its end.
If you set only the end time tag, the recording will be played from its start till the
final tagged position.
If you wish to cancel the continuous playback, you need to clear the time tags.
Press the
to stop the playback.
Then press the
button to set a new start time tag on the current position.
The tag colour will become green.
Press the
button again to delete the previous start time tag.
Then press the
button to set a new end time tag on the current position. The
tag colour will become green.
Press the
button again to delete the previous end time tag.
Available function
During playback, use the
button to choose functions that can be applied to the au-
dio file being played. Pressing this button displays function:
– noise cancellation possibilities;
– changing playback speed
– volume control in the right and left channels separately;
– turn back to the current mode without stopping or pausing the playback.
Follow the instructions below to select a corresponding function to an audio file being
played.
