V1.0 Created on Apr 10
th
2013
King Golden Ltd.
Speed Passion Reventon Pro 1.1 - 2 cell LiPo User Manual
Page 16
13.4 CUSTOM PROGRAM EXAMPLE
In the following example, the following characters are used to represent the different buttons.
►
I = Press the “ITEM” button,
V = Press the “VALUE” button
►
R = Press the “RESET” button,
O = Press the “OK” button
Custom values allow users to fine turning the ESC’s programmable parameters (
Note14
). The LCD programmer will show a
letter “C” before the value to indicate that it is a custom setting. To enter the fine tuning functions, press the “OK” button
on the selected programmable parameter. In this mode, the letter “C” will be blink. Press the “Item” button to fine tune
the setting. Press the “OK” button to save the current setting into the ESC. The LCD programmer will leave the “fine
tuning” mode after the setting is saved into the ESC or the user presses the “Item” button. In the “fine tuning” mode, press
“Reset” button will save the default setting into the ESC and then leave the “fine tuning” mode automatically.
Note14:
LCD program card will not display the custom setting if the ESC firmware does not support the feature.
