Commercial Built to Last Longer
Multi-Housing
RFP Bid Specifications
Product Type:
Front Load Washer
Model:
Coin SFNNCRSP111TW01
Card SFNNYRSP111TW01
Operation:
Front Control With
Electronic Display
Coin Drop
SFNNCRSP111TW01
™
™
™
1.
Cabinet Finish
– Cabinet shall be galvanized
steel with zinc phosphate pre-treat. Topcoat
shall be high base polyester powder.
2.
Size –
43" height x 267/8" width x 28" depth.
3.
Load Capacity –
18 lbs.
4.
Cylinder Volume –
2.84 cu ft.
5.
Outer/Inner Cylinder Material –
Both inner
wash basket and outer tub assembly shall be
made of stainless steel that will not chip, rust
or corrode.
6.
Inlet Hoses –
Inlet hoses shall be four feet in
length and able to withstand 600 psi
hydrostatic pressure at 190° Fahrenheit.
7.
Motor –
1 HP induction motor with
electronic overload protection and reversing
wash action.
8.
Spin Speeds –
The unit shall feature
three-speed distribution to ensure proper load
balancing and maximum water extraction.
9.
Wash Speeds –
Shall have two wash speeds to
properly launder all fabrics.
10.
Extract/G-Force –
High speed extract. 1000
RPM final spin extract generates 300 G-Force
that maximizes water removal from clothes
for faster drying.
11.
Water Consumption –
10.9 gal per cycle.
U.S. Department of Energy compliant to
commercial washer standards for saving
energy and water.
- ENERGY STAR® qualified.
- CEE Tier 3 rated
- Modified Energy Factor (MEF) 2.46
- Water Factor (WF) 3.83
12.
Front Control Panel –
The control panel shall
be located in the front of unit for customer
convenience and Americans with Disabilities
Act (ADA) compliant with side reach
exception for 36" over obstruction
cabinet top.
13.
See-Through Door –
With 180°swing for easy
loading and unloading. The hinge is a robust
10" steel piano style to maintain door
alignment.
