1
Assembl
y /
Inst
A
ll
At
Ion
o
per
At
Ion
troubleshoot
Ing
mAI
nten
A
nce /
r
ep
AI
r
DESCRIPtION
Speedaire Condensate Separators have been designed for the removal of bulk liquid
water and particulate from compressed air and gases. Unique centrifugal action removes
contaminants with low-pressure drop for energy savings. Speedaire Condensate Separators
are available in 1/4” – 3” NPT pipe sizes for flows up to 1294 SCFM (2200 m³/hour). While
highly efficient, condensate separators will not remove 100% of the oil from the air stream.
Additional coalescing and particulate filters downstream are normally required to remove
the final traces of oil, water and particles, which migrate through the separator.
UNPaCkING
Inspect:
•
Handle carefully. Check the packing list to account for all items.
Visually inspect for shipping damage. If damaged, immediately
file a claim with the carrier.
GENERaL SafEty INStRUCtIONS
IMPORtaNt:
Please read and save these instructions.
Disconnect or depressurize compressed air line
prior to any installation or maintenance activity.
Eye protection goggles or safety glasses are always recommended
during installation and maintenance.
SPECIfICatIONS
Common System Configurations
(reference only):
g
ett
Ing
st
A
rted
sA
fety
/
spec
If
Ic
At
Ions
Pre-Filter / Particulate Filter
General Purpose Filter / Water Removal
Coalescing Filter / Oil Removal
Activated Carbon Filter / Odor Removal
Point of use Filtration, Regulation,
and Lubrication as needed.
types of Compressed air filters:
Condensate
Separator
Receiver
Tank
External
Auto Drain
Compressor
figure 1
