OPERATING INSTRUCTIONS
How to start (Fig D):
1. Close the tank drain valve (4).
2. Plug-in the power cord (2).
3. Set the ON/OFF switch (1) to the ON position and allow the tank pressure
to build. Motor will stop when tank pressure reaches cut-out pressure.
4. Turn the air pressure regulator knob (5) clockwise until desired pressure
is reached.
5. The compressor is ready for use.
How to shut down (Fig D):
1. Set the ON/OFF switch (1) to the OFF position.
2. Unplug the power cord (2).
3. Reduce the pressure in the tank through the outlet hose or by pulling the
safety valve ring (3) and keeping it open.
4. Once pressure has been removed from the tank, tip the compressor so
the tank drain valve (4) is at the bottom of the tank. Open the tank drain
valve counter-clockwise to allow any moisture to drain from the tank.
Fig D
4
1
5
2
8
MAINTENANCE /
REPAIR
TROUBLESHOOTING
OPERATION
ASSEMBLY /
INSTALLATION
S
A
FET
Y
/
SPE
C
IFI
C
A
TIO
NS
GETTING STARTED
Fig E
3
OFF
ON
