Using GMOS 12
•
The max log time is 7 hours or 254 logs.
•
If the REC Icon does not appear after you press
SELECT
to start recording,
this means the system can not record logs. A message will be displayed in
the Message Area indicating the reason: the GPS module is still position-
ing; the memory is full; or the number of logs has reached 254. Please refer
to 10. Message Area (p.14) for more information.
•
Entering System Menu will not interrupt recording, unless you go on to en-
ter Timer Mode.
•
To clear the logs, you can either download and clear them with the Speed-
Angle R3 software, or go to System Menu and select “
CLEAR MEMORY
” to
clear them directly.
3
Temperature Alert
flashes when the environmental temperature is below or above the operating
temperature range of the sensor (36°F ~ 140°F or 2°C ~ 60°C). flashes
when the temperature is below 36°F (2°C), while
flashes when the tempera
-
ture is above 140°F (60°C).
•
Environmental temperature below or above the sensor’s operating tempera-
ture range might affect measurement accuracy.
4
Battery Icon
indicates the charge of the battery.
•
When the battery is almost empty, a “
LOW BATTERY
!”
message will be prompted. Please recharge GMOS as
soon as possible.
5
Current Time
indicates the current time of the preset Time Zone.
•
To set the Time Zone, please go to System Menu and select “
TIMEZONE
GMT
”.
6
G-force Bar
indicates the real time G. A right-going bar indicates acceleration, while a left-
going bar deceleration.
•
if the bar is not back at center when the bike is stationary, the sensor is not
horizontal. Please adjust till the bubble of the bubble level is in the center
circle.
LOW BATTERY!
PLEASE TURN OFF POWER
TO PROTECT BATTERY