background image

SC-TC-60

4

Model SC-TC-60 Operating and Maintenance Manual 

Important Safety Instructions

• 

Check for misalignment or binding of moving parts, breakage of parts, and any other 
condition that may affect the tool’s operation.

 If damaged, have the tool serviced  

before using.

• 

If the machine does not operate properly or is damaged, contact Speedclean  
Customer Service.

4. Service

• 

Unplug the power cord when servicing the unit or leaving the machine unattended.

• 

Tool service must be performed only by qualified repair personnel. 

Service or 

maintenance performed by unqualified personnel could result in a risk of injury.

• 

When servicing a tool, use only identical replacement parts

. Follow instructions in the 

Maintenance section of this manual. Use of unauthorized parts or failure to follow 
Maintenance Instructions may create a risk of electric shock or injury.

• 

DANGER!!

 DO NOT OPERATE THE UNIT WITH COVER(S) REMOVED WITH MOVING PARTS AND 

ELECTRICAL CONNECTIONS EXPOSED!!!

Safety Checklist

Do’s

• 

Keep this manual with the unit at all times.

• 

Always grasp the plug - not the cord - when unplugging from AC power.

• 

Always run 

clean

 water through the unit.

• 

Always secure the unit while transporting to prevent it from damage.

• 

Store unit indoors in a cool, dry area and protect from freezing. If the unit is stored in an 
unheated location and temperatures reach freezing, damage to the internal components 
may occur.

• 

Always be extra careful when not on level, secure ground.

• 

Keep operational area clear of all persons.

• 

Use only SPEEDCLEAN recommended attachments.

Don’ts

• 

Don’t use the SC-TC-60 if it is not in good operating condition, is not completely assembled, 
or is damaged. Always inspect the unit to ensure there are no leaks.

• 

Don’t operate without eye protection.

• 

Don’t spray the SC-TC-60 with high-pressure water. Wipe it down with a damp rag.

• 

Don’t point flexible shafts at people or animals as the end of the shaft rotates at high 
speeds which may cause serious injury.

• 

Don’t use the unit with combustible fluids.

SC-TC-60

Summary of Contents for SC-TC-60













Reviews: