Introduction.
Thank you for purchasing the Speedfit Aura Wireless
TRV (JGTRV). The JGTRV simply replaces the passive head supplied
with a standard Thermostatic Radiator Valve (TRV). The JGTRV must be
used with a JGSTATW1 or JGSTATW2 Wireless Thermostat and a JGCO
Wireless coordinator (all sold separately). The JGTRV can be used with
the JGBR Wireless Boiler Receiver (configured to RX1) and other Aura
wireless products (see below).
Product Compliance.
This product is CE compliant and meets the
following EC Directives:
RoHS2 directive 2011/65/EU, Electro-Magnetic Compatibility
directive 2004/108/EC and Low voltage directive 2006/95/EC.
Safety Information.
Use in accordance with the regulations. The
Aura JGTRV is to be used for room control in buildings.
Installation.
This accessory must be fitted by a competent
person, and installation must comply with the guidance, standards
and regulations applicable to the location where the product is
installed. Failure to comply with the relevant standards could lead to
prosecution.
JGSTATW1/
JGSTATW2
Thermostat (Required)
Wiring Centre JGWCW
JGBR
(Optional)
JGCO
(Required)
03
speedfitUFH.co.uk
Product Compliance & Safety Information
