To provide the best level of system control, we recommend that the
JGTRV is installed with a JGBR Boiler Receiver (configured to RX1).
This enables the Wireless Thermostats in the system to switch the boiler
on/off whilst also opening/closing the radiator valves.
+
Only 3 TRV’s can be paried to a JGSTATW1/JGSTATW2.
The JGTRV is
modulating which
means it can
regulate the flow-
rate through the
valve. A paired
Wireless Thermostat
increases/decreases
the flow-rate
through the valve
based on the
difference between
the set temperature
and the room
temperature.
04
Wireless TRV Instruction Manual
System Overview
