6
3.
Maintenance
Regular maintenance
Periodic cleaning and inspection of the condition of the lubrication will keep the SPT-1000(C) in optimal condition.
The following is the recommended maintenance schedule. In environments with severe pollution, the
frequency of inspections and maintenance should be increased.
Weekly maintenance
Clean the frame and plastic surfaces with a soft cloth or brush. Do not use abrasive cleaning materials
or brushes.
Clean the handle and the side cover with a damp cloth.
Check the surface condition of the drive belt of the SPT-1000(C).
Six monthly maintenance
Remove the plastic side covers and check the tightness status of the frame bolts and nuts.
Check the bearings and wear condition of the surface of the SPT-1000(C) belt and drive assembly.
Annual maintenance
Check the 6-monthly maintenance information.
Check the condition of the lubrication of front and rear roller bearings. If the bearings are tight or not
rotating smoothly, lubricate the roller bearing using a quality grease and grease gun.
CAUTION
In conditions causing high static electricity, the surface if the SPT-1000(C) should carefully sprayed with light
mist of an approved anti-static spray
