english
3
5 Installation
Switch off PC.
Connect SL-6508 Intruder to the DB-15 game port / Soundblaster card
on the rear side of your computer and make sure it is firmly connected.
The game port is generally the standard DB-15 type and is usual-
ly located on the rear panel of your computer.
After the hardware installation has been completed, restart your PC.
Follow the necessary setup procedure for both gamepad and game soft-
ware.
6 Set-up in DOS / and Windows 95/ 98/ ME /2000/ XP
Please refer to the instructions regarding joystick settings in the game
manual in order to complete the relevant settings.
DOS Set up
If your game software needs to run under MS-DOS, then apart from
setting the game control option to joystick under DOS; it is usually
necessary to calibrate the gamepad in the options menu of the
desired game.
Windows Set Up
Start Windows 95/ 98/ ME /2000/ XP, select Start \ Setting \ Control
Panel \ Game Controllers or Joysticks.
Select the desires gamepad from the Game Controller Menu or click
“Add” from “Game Controller“ page, select “2 Axis, 8-Button Gamepad
(208i)“ from the game controllers menu and then press “OK “ to return
to the Game Controllers page.
Click on “Properties“ and then “Calibrate“
When the “Controller 1 Calibration” menu appears, follow the on-
screen instructions to do the calibration step-by-step:
Set the Joystick’s center position...Then press the gamepad button 1
Select the range of motion …Turn the D-pad 2 or 3 times and press the
INTRUDER Manual.qx 07.11.2001 9:43 Uhr Seite 3
