Speedway leger User Manual
15
Safety guidelines before driving
Battery disassembly prohibited
Battery disassembly, modification, and repair are not covered under warranty.
1) Required checking before use
• Check the front and rear tires for wear and punctures and check the value marked on the
surface of the tire.
When the air pressure is shortened, the possibility of puncture increases, so check always.
• It is necessary to judge the replacement time by observing the appearance of the tire such
as tire damage, uneven wear.
3. Check tire pressure and abnormal tread wear
1. Check throttle and handle
•
Operate the accelerator throttle lever about 2 ~ 3 times to check whether it returns to the home position.
• Be careful that excessive throttle leaning and manipulation of the throttle can cause
malfunction due to internal parts damage.
If you encounter any of the following situations while driving, stop driving
immediately and contact your nearest branch or service center for proper
measures.
If you provide pictures and videos to get an accurate diagnosis, professional counseling is available.
* In these cases, stop driving immediately.
●
Unusual heating of the motor
●
Brake braking status error
●
Error messages on the instrument panel
●
When the throttle is not returned to its original position
●
When the battery doesn't fully charge and shorter riding distance after a full charge
(Battery explosion may cause due to faulty battery cell or battery cell breakdown)
●
Abnormal noise is generated
●
Product smoke, ignition, sour odor
●
When rain or wet with water or in a similar situation
●
When other driving is judged to be unreasonable
DANGER
WARNING
CAUTION
NOTICE
DANGER
•
The brake braking force is sufficient to check the operating condition.
If the braking force is significantly lowered, use it immediately after inspection and action.
• Check that the brake pad is not worn, that the cable is not loose, that the cable is not
damaged, and that there is no leakage in the case of hydraulic brakes.
• If there is an unusual feeling or noise during operation, check for breakage, wear, and
deformation of the inner wire of the brake cable.
•
Check that the bolts and nuts of the brake fixing parts are not loose and that the disc is not deformed or damaged.
2. Check brake and cable
•
Make sure that the bolts and nuts of all parts of the product are tight and safe from
loosening. Check the fastening condition and clearance of the folding and fixing parts of
the handle.
•
Check that the fixed shaft is working smoothly and check that it is correctly
positioned where the fixed shaft and the body are in contact before use, and
check the deformation of the connecting part and the related parts. If there is any
abnormality, stop using it immediately and use it after inspection.
4.Tightening check such as folding part and handle part
