background image

Spektrum Air Module

28

Spektrum Air Module

29

HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS 

IN ANY WAY CONNECTED WITH THE PRODUCT, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. Further, 

in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final 

assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user 

accepts all resulting liability.
If you as the Purchaser or user are not prepared to accept the liability associated with the use of this Product, you are advised to return this Product immediately 

in new and unused condition to the place of purchase.
Law: These Terms are governed by Illinois law (without regard to conflict of law principals).

Safety Precautions

This is a sophisticated hobby Product and not a toy. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to 

operate this Product in a safe and responsible manner could result in injury or damage to the Product or other property. This Product is not intended for use by 

children without direct adult supervision. The Product manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the 

instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or injury.

Questions, Assistance, and Repairs

Your local hobby store and/or place of purchase cannot provide warranty support or repair. Once assembly, setup or use of the Product has been started, you must 

contact Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or 

assistance, please direct your email to productsupport@horizonhobby.com, or call 877.504.0233 toll free to speak to a service technician.

Inspection or Repairs

If this Product needs to be inspected or repaired, please call for a Return Merchandise Authorization (RMA). Pack the Product securely using a shipping carton. 

Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that 

provides tracking and insurance for lost or damaged parcels, as

 Horizon is not responsible for merchandise until it arrives and is accepted at our 

facility. 

A Service Repair Request is available at www.horizonhobby.com on the “Support” tab. If you do not have internet access, please include a letter with 

your complete name, street address, email address and phone number where you can be reached during business days, your RMA number, a list of the included 

items, method of payment for any non-warranty expenses and a brief summary of the problem. Your original sales receipt must also be included for warranty 

consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton.

Warranty Inspection and Repairs

To receive warranty service, you must include your original sales receipt 

verifying the proof-of-purchase date. Provided warranty conditions have 

been met, your Product will be repaired or replaced free of charge. Repair or replacement decisions are at the sole discretion of Horizon Hobby.

Non-Warranty Repairs

Should your repair not be covered by warranty the repair will be completed and payment will be required without notification or estimate 

of the expense unless the expense exceeds 50% of the retail purchase cost. 

By submitting the item for repair you are agreeing to payment of the 

repair without notification. Repair estimates are available upon request. You must include this request with your repair. Non-warranty repair estimates will be billed 

a minimum of ½ hour of labor. In addition you will be billed for return freight. Please advise us of your preferred method of payment. Horizon accepts money 

orders and cashiers checks, as well as Visa, MasterCard, American Express, and Discover cards. If you choose to pay by credit card, please include your credit 

card number and expiration date. Any repair left unpaid or unclaimed after 90 days will be considered abandoned and will be disposed of accordingly.

  

Please note: non-warranty repair is only available on electronics and model engines.

Products requiring warranty inspection or repair should be shipped to the following address:

Damage Limits

Horizon Hobby, UK 

Units 1–4 Ployters Rd Staple Tye

Harlow, Essex CM18 7NS 

United Kingdom

Please call +44 (0) 1279 641 097 or 

email us at sales@horizonhobby.co.uk with 

any questions or concerns regarding this 

product or warranty.

Horizon Hobby, USA 

4105 Fieldstone Road

Champaign, IL 61822, USA

 

Horizon Hobby, Deutschland GmbH 

Hamburger Str. 10

25335 Elmshorn

Germany

Please call +49 4121 46199 66 or  

email us at service@horizonhobby.de with 

any questions or concerns regarding this 

product or warranty.

Summary of Contents for DSM


















Reviews: