STEP 6
To arm the drone put switch “A”
into position “0” and the drone will
be ready for flight.
WARNING:
Once the drone is
armed the motor and propellers will
spin.
STEP 5
Next make sure the drone is ready
to arm. To do this make sure that
the blue light on the GPS is either
solid or flashing. If not consult the
troubleshooting section of the user
manual.
STEP 4
The controller should be placed into flight mode 3
before takeoff. The current flight mode will be
displayed on the screen (above left). To ensure this
make sure that switch “B” is in position “2” (right).
