8
EN
ThROTTLE 50/50, 70/30 SWITCh
The DX2M features a two-position throttle stick that adjusts the ratio of travel
forward and backward. It can be either 50/50 or 70/30. The 50/ 50 throttle
position offers symmetrical stick travel in both forward and backward directions.
This is commonly used for boats that have proportional forward and proportional
reverse control. The 70/30 throttle position provides a larger 70% forward
stroke, offering more precise forward control for boats that use forward only.
Note that many electronic speed controllers require the proper setting in order
to arm the controller. It may be necessary to select 50/50 or 70/30 to arm your
particular controller.
FRANCE RF SETTING
TO SET FRANCE MODE:
Push and hold the bind button on the top of the transmitter while pushing and
holding the two sticks as shown below and then turn on the power switch.
After hearing a series of increasing beep tones (low to high), release the trainer
switch and the sticks. The France setting is now turned on.
TO SET STANDARD MODE:
Push and hold the bind button on the top of the transmitter while pushing and
holding the two sticks as shown below and then turn on the power switch.
After hearing a series of decreasing beep tones (high to low), release the trainer
switch and the sticks. The France setting is now turned off.
GENERAL NOTES
Radio controlled models are a great source of pleasure. Unfortunately, they can
also pose a potential hazard if not operated and maintained properly.
It is imperative to install your radio control system correctly. Additionally,
your level of operating competency must be high enough to ensure you are
able to control your model under all conditions. If you are a newcomer to radio
controlled models, please seek help from an experienced modeler or your
local hobby shop.
50/50
70/30
