13
Spektrum DX3C • Radio Instruction Manual
EN
Reset
The Model Reset function restores factory default settings for
the active model memory.
A
Choosing
Yes
affirms erasing saved settings for the active
model memory and return of factory defaults.
B
A box shows around selected text.
C
Choosing
No
returns to the List Screen.
CAUTION:
Model information saved in a memory is
erased when that model memory is copied over or reset
to factory default settings.
Mixing
The Mixing function lets Steering, Throttle or Aux Channel follow
control input made to the Steering, Throttle or Aux channel.
When a mix is enabled and the assigned input control is moved,
the master (primary) channel sends output at the same time the
slave (secondary) channel sends output. Output is sent to the
model in the direction and to the position assigned in the Mixing
Screen.
Note:
You can only select the Aux channel as Slave in this
screen when Steer Mix is inhibited.
Mixing default setting is inhibit (
Inh
). When anything other than
Inh is selected, you can make additional adjustments on the
Mixing Screen.
A
Inh must be changed to enter other mixing values.
B
A box shows around selected text.
C
This rate value sets the amount of slave servo travel and can
be set from -125% to +125%. A negative value results in
the slave channel moving in a direction opposite the direc-
tion of the primary channel.
D
The primary or master channel can be either
ST
(Steering),
TH
(Throttle) or AUX (Auxiliary).
E
The secondary or Slave channel can be set on
ST
,
TH
or
Aux
(Channel 3 Auxiliary).
F
This rate value can be set from -125% to +125%.
G
This can be set on
Inh
(inhibit) or
Act
(activate) When set to
Act
, trim changes on the master channel will also change
the slave channel trim.
NOTICE:
Before driving a model, always do a check of the
model’s response to mix settings. Raise vehicle so vehicle does
not move on tires during testing.
CAUTION:
A negative value results in the secondary
channel moving in a direction opposite the direction of
the primary channel.
Reset
No
Yes
A
B
C
Mixing
ST > Aux
Rate:
50% 50%
Trim: Inh
C
D
E
F
G
A
Mixing
Inh
B