background image

2

Spektrum DX3C • Radio Instruction Manual

EN

General Notes

Radio controlled models are a great source of pleasure. Unfortunately, they can also pose a potential hazard if not operated and 
maintained properly.
It is imperative to install your radio control system correctly. Additionally, your level of operating competency must be high enough to 
ensure you are able to control your model under all conditions. If you are a newcomer to radio controlled models, please seek help 
from an experienced modeler or your local hobby shop.

FRANCE RF SETTING:

 The DX3C has a France RF setting that complies with French regulations. Always use the France power set-

ting when operating the transmitter outdoors in France.

WARNING:

 Read the ENTIRE instruction manual to become familiar with the features of the product before operating. 

Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. 
 

This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical 
ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other 
property. This product is not intended for use by children without direct adult supervision. Do not attempt disassembly, use with 
incompatible components or augment product in any way without the approval of Horizon Hobby, Inc. This manual contains instruc-
tions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to 
assembly, setup or use, in order to operate correctly and avoid damage or serious injury.

The following terms are used throughout the product literature to indicate various levels of potential harm when operating this 
product:

NOTICE:

 Procedures, which if not properly followed, create a possibility of physical property damage AND a little or no possibility of 

injury.

CAUTION:

 Procedures, which if not properly followed, create the probability of physical property damage AND a possibility of seri-

ous injury.

WARNING:

 Procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious 

injury OR create a high probability of superficial injury. 

NOTICE

All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, Inc.  
For up-to-date product literature, visit horizonhobby.com and click on the support tab for this product.

Meaning of Special Language

WARNING AGAINST COUNTERFEIT PRODUCTS 

Thank you for purchasing a genuine Spektrum product. Always purchase from a Horizon Hobby, Inc. authorized dealer 
to ensure authentic high-quality Spektrum product. Horizon Hobby, Inc. disclaims all support and warranty with regards, 
but not limited to, compatibility and performance of counterfeit products or products claiming compatibility with DSM or 
Spektrum.

WARRANTY REGISTRATION

Visit www.spektrumrc.com/registration today to register your product.

Safety Points to Obey for Modelers

• Make sure your transmitter and receiver batteries are fully charged before each use of the transmitter.
• Keep track of the time the system is turned on so you will know how long you can safely operate your transmitter.
• Make sure all servos, linkages and electrical wires are correctly connected before operating a model. 
• Do not operate your model near spectators, parking areas or any other area that could result in injury to people or damage of 

property.

• Do not operate your model during adverse weather conditions. Poor visibility can cause disorientation and loss of control of your 

model.

• Always stop your model if it becomes less responsive to your transmitter. Get your model under your full control and make 

repairs as needed. 

Summary of Contents for DX3C



















Reviews: