37
SPEKTRUM NX6 • TRANSMITTER INSTRUCTION MANUAL
EN
FUNCTION LIST
TICKER TAPE
FUNCTION BAR
Ticker Tape Setup:
The screen can display up to 10 features on the bar.
Each slot can be configured to hold:
•
A telemetry sensor report
•
The position of an input switch
Sensor Configuration:
Pick the sensors you want to display from the list of sensors in the active telemetry
list. After selecting a sensor, configure the data to display to suit your needs.
Field:
Select the input you want to have displayed, and the amount of time it should be shown.
MY LIST SETUP
My List gives you quick access to a short list of commonly used menu items you create.
•
Press the Function button to open My List
•
Scroll to select the menu you want, and click to choose that option
•
CLEAR will take you to the first entry on the list
•
BACK or FUNC will exit to original screen
IMPORTANT:
If a menu option is not available on the Function List such as due to a Wing/Tail type change, it will not be selectable from the My List.
IMPORTANT:
You can pick entries from the Function List, however you cannot pick sub-options for the My List setup.
The Function Bar on the NX6 offers 2 features, a Ticker Tape to
show telemetry values and My List which allows quick access to
menu items chosen that are frequently used.
Playback Mode:
When the NX6 transmitter is showing the normal display (home
screen), the system shows the telemetry scrolling across the
bottom of the screen.
Configuration:
Select Function Bar on the Function List to access the setup screen.
Select the ticker tape display or the My List display for configuration.
Use System Setup to enter the System List from the Function list
without turning the transmitter off. A Caution screen will appear
that warns that RF will be disabled (the transmitter will no longer
transmit). Press
YES
if you are sure and want to access the System
List. If you are not sure, press
NO
to exit to the main screen and
continue operation.
If you do not press
YES
or
NO
, the system will exit to the main
screen and continue operation within approximately 10 seconds.
WARNING:
Do not press
YES
unless the model is turned
off or the model is secured.
System Setup
