Spektrum NX8 Instruction Manual Download

Page: 20 / 54

SPEKTRUM NX8 • TRANSMITTER INSTRUCTION MANUAL

Wireless Trainer works just like the Wired Trainer, without the wire.

Select Wireless Trainer to bind a DSM2 or DSMX student transmitter

to the instructor transmitter. With this option, when the instructor

presses the trainer button or switch, control is given to the currently

bound student transmitter. After binding, the student transmitter will

remain bound to the instructor transmitter until a different transmitter

is bound to the master, or the student transmitter is bound to another

receiver or a wireless instructor transmitter. ModelMatch™ technol-

ogy applies to the wireless trainer system; the instructor transmitter

will be bound to the student in the bound model used. Also, if the

student transmitter has ModelMatch technology, it will only be bound

to the instructor transmitter in the selected model during binding.

Inhibit

In Inhibit, the wireless trainer function will be inhibited and will not

function.

CAUTION:

Select Inhibit in the Trainer menu when you

aren’t using the wireless trainer function. Failure to

select Inhibit may result in loss of control of the aircraft.

Programmable Master

Programmable mode enables you to program the instructor

transmitter to transfer any or all individual channels when you

activate the trainer switch. This mode is ideal for beginners

learning to control individual channels while the instructor

transmitter maintains control of all other channels. The student

transmitter should be in Inhibit mode, if available. The Instructor

and Student transmitters MUST have the same programming.

Pilot Link Master

Pilot Link Instructor enables you to program the instructor transmitter

to transfer any or all individual channels when you activate the

trainer switch. Pilot Link Instructor is ideal for complex models,

as the instructor transmitter maintains control of all secondary

functions, such as flight modes, retracts, flaps and brakes.

Secondary functions can be individually assigned to the

Student transmitter as necessary. It is not necessary to

have model programming in the student transmitter.

NX8 Wireless Trainer Operation

1. Enter an unused model on the student transmitter (computer

transmitter only).

2. Bind the instructor transmitter to the model.
3. Make sure the instructor and student transmitter battery

packs are fully charged.

4. Make sure the student transmitter is powered off.
5. Either in the Wireless Programmable Instructor setup page or

the Wireless Pilot Link Instructor setup page, select BIND. This

will put the instructor transmitter’s wireless trainer receiver

into bind mode. You should see the following screen:

6. Enter bind mode on the student transmitter following the

instructions provided with that transmitter.

7. After a successful bind, the following screen should appear:

8. Press the trainer button on the instructor transmitter to trans-

fer model control from the instructor to the student.

9. Release the trainer button and the instructor transmitter

regains control of the model.

Master Override

The Master Override feature enables the instructor to immediately

regain control of the model by moving the control sticks. After you

activate Master Override, the student transmitter cannot control the

model until you reset the trainer switch. To reset the trainer switch:

1. Move the trainer switch to the OFF position.
2. Move the trainer switch to the ON position to activate the

student transmitter.

SYSTEM SETUP

Wireless Trainer

Wired Trainer

Wired Trainer enables a student and instructor to work together by

physically connecting two transmitters together with a cable.

The optional Spektrum wired trainer adaptor (SPMA3091, not

included) and trainer cable (SPM6805, not included) are required

for wired trainer operation. The wired trainer adaptor connects

to the serial port on the back of the transmitter. The trainer cable

plugs into the adaptor.

Wired trainer supports up to 8 input channels with PPM based

trainer systems connected. If the NX8 is used with a wired

connection, the correct wired trainer option must be selected in

the trainer menu and the student mode started or the wired trainer

connection will not work.

When Wired Trainer mode is selected, a menu will appear. Select

from the following trainer options:

Standard Instructor

This training mode designates the NX8 as the instructor, and

requires the student transmitter to be fully configured, including

reversing, travel, mixes, etc. This mode is helpful when the student

has the full model configuration complete.

Pilot Link Instructor

This training mode designates the NX8 as the instructor, and

requires the student transmitter to have no settings applied, all of

the reverse settings to normal and all travel settings at 100%. This

option is intended to make it as simple as possible to connect any

student transmitter to any airplane.

Summary of Contents for NX8























































Search results

Summary of Contents for NX8

Reviews:

Related manuals for NX8

Brands by name

Popular brands

Spektrum NX8, Instruction Manual

Search results

Summary of Contents for NX8

Reviews:

Related manuals for NX8

Brands by name

Popular brands