EN
9
To access a programmable feature, power on with full throttle (musical confirmation sound).
t
Pull throttle to center (1 long beep).
To
assign
No
Brake: Push throttle to full (1 short beep).
(Default)
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
To
assign
Soft
Brake: Keep throttle at full for 5 seconds (2 short beeps).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
To
assign
Center
Brake: Keep throttle at full for 10 seconds (3 short beeps).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
To
assign
Hard
Brake: Keep throttle at full for 15 seconds (4 short beeps).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
t
Pull throttle to center, hold for 5 seconds (2 long beeps).
5°
: Push throttle to full (1 short beep).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
10°
: Keep throttle at full for 5 seconds (2 short beeps).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
15°
: Keep throttle at full for 10 seconds (3 short beeps).
(Default)
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
20°
: Keep throttle at full for 15 seconds (4 short beeps).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
25°
: Keep throttle at full for 20 seconds (5 short beeps).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
t
Pull throttle to center, hold for 10 seconds (3 long beeps).
1.2–1.8ms
: Push throttle to full (1 short beep).
(Default)
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound)
1.1–1.9ms
: Keep throttle at full for 5 seconds (2 short beeps).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
t
Pull throttle to center, hold for 15 seconds (4 long beeps).
0.25s
: Push throttle to full (1 short beep).
(Default)
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
1.0s
: Keep throttle at full for 5 seconds (2 short beeps).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
t
Pull throttle to center, hold for 20 seconds (5 long beeps).
8kHz
: Push throttle to full (1 short beep).
(Default)
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
16kHz
: Keep throttle at full for 5 seconds (2 short beeps).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
32kHz
: Keep throttle at full for 10 seconds (3 short beeps).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
t
Pull throttle to center, hold for 25 seconds (6 long beeps).
Normal
Mode: Push throttle to full (1 short beep).
(Default)
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
Heli
Mode: Keep throttle at full for 5 seconds (2 short beeps).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
Cutoff voltage: 6.1V is unchangeable.
Recycle ESC power with throttle idle after changing settings.
Recycle the power after you hear the Hi Lo Hi Lo confirming beeps after changing the settings.
Programming the Brushless ESC
Brake
T
iming
Throttle
Range
Starting
Rate
PWM Switching
Frequency
Mode
