background image

EN

2

NOTICE

All instructions, warranties and other collateral documents are subject to 
change at the sole discretion of Horizon Hobby, LLC. For up-to-date product 
literature, visit horizonhobby.com and click on the support tab for this product. 

Meaning of Special Language

The following terms are used throughout the product literature to indicate 
various levels of potential harm when operating this product:

WARNING:

 Procedures, which if not properly followed, create the probability 

of property damage, collateral damage, and serious injury OR create a high 
probability of superfi cial injury.

CAUTION:

 Procedures, which if not properly followed, create the probability 

of physical property damage AND a possibility of serious injury.

NOTICE:

 Procedures, which if not properly followed, create a possibility of 

physical property damage AND a little or no possibility of injury.

 

WARNING:

 Read the ENTIRE instruction manual to become familiar 

with the features of the product before operating. Failure to operate 
the product correctly can result in damage to the product, personal 
property and cause serious injury.

This is a sophisticated hobby product. It must be operated with caution and 
common sense and requires some basic mechanical ability. Failure to oper-
ate this Product in a safe and responsible manner could result in injury or 
damage to the product or other property. This product is not intended for use 
by children without direct adult supervision. Do not attempt disassembly, use 
with incompatible components or augment product in any way without the 
approval of Horizon Hobby, LLC. This manual contains instructions for safety, 
operation and maintenance. It is essential to read and follow all the instruc-
tions and warnings in the manual, prior to assembly, setup or use, in order to 
operate correctly and avoid damage or serious injury.

Age Recommendation: Not for children under 14 years. This is not a toy.

WARNING AGAINST COUNTERFEIT PRODUCTS 

Always purchase from a Horizon Hobby, LLC authorized dealer to ensure 
authentic high-quality Spektrum product. Horizon Hobby, LLC disclaims 
all support and warranty with regards, but not limited to, compatibility and 
performance of counterfeit products or products claiming compatibility with 
DSM or Spektrum technology.

NOTICE:

 This product is only intended for use with unmanned, hobby-grade, 

remote-controlled vehicles and aircraft. Horizon Hobby disclaims all liability outside 
of the intended purpose and will not provide warranty service related thereto.

WARRANTY REGISTRATION

Visit www.spektrumrc.com/registration today to register your product.

Summary of Contents for SPMLTG5000
















Reviews: