S4H-RE-00, S4H-RE-10
14
8.
Symbols and messages
Wi-Fi relay symbol
Relay ON symbol
Relay OFF symbol
Symbol for switching the Wi-Fi relay to the pulse mode / information on pulse
generation on the overview screen. The pulse duration is 1 second.
Backlit control button showing the current status of the relay in question. This
symbol shows that the relay is OFF. Pressing this button will switch the relay
on.
The orange circle around the button symbol will flash if a relay status change
request is sent. This flashing will stop once the execution of the request is
acknowledged.
A green backlit button indicates that the relay is ON. If the button is pressed
now, the reverse sequence will run.
The Wi-Fi relay is not configured to your AP/router
This message informs you that communication between the
Wi-Fi relay and the cloud has been lost for a time longer
than 1 hour. This may be due to a Wi-Fi relay failure, loss
of connection between the Wi-Fi relay and AP (increased
Wi-Fi signal attenuation, AP power supply failure) or loss of
AP connection to the Internet.
