SPEL Smart4house RE-00 Series Installation And Operating Instructions Manual Download

Page: 15 / 18

S4H-RE-00, S4H-RE-10

8.1.

When the application is running on foreground, notification will be displayed for 3 sec. .

When the App is on background, notification will be displayed on the screen until you open the
app.

If Emai notifications are allowed, you will get Email on selected address.

Example:

Application Smart4house send you this notification:
Relay Switch RECONNECTED.
This is an automatically generated emai, please don´t reply.

LED lights

Illuminating LED 1 indicates activation of Re 1 relay

Illuminating LED 2 indicates activation of Re 2 relay

9.1.

Overview of Wi-Fi relay states and LED 3 lights

Colour

Light

Meaning

Mode

Orange

Illumin.

Wi-Fi relay attempts to connect to AP

Initialisation/operation

Orange

Flashing Wi-Fi relay establishing connection to AP

Initialisation

Red

Illumin.

Wi-Fi relay formed AP S4H for 3 min

Initialisation

Red

Flashing

Data transmission from smartphone to

Wi-Fi relay

Initialisation

Green

Illumin.

Wi-Fi relay connection is OK

Operation

10.

List of Wi-Fi relay messages / status change messages

The status of the Wi-Fi relay outputs can be viewed by calling the application, where the last 10
records are displayed. Each record is completed with a time stamp. Current relay status is also
indicated by the control button backlighting.

Summary of Contents for Smart4house RE-00 Series



















Search results

Summary of Contents for Smart4house RE-00 Series

Reviews:

Related manuals for Smart4house RE-00 Series

Brands by name

Popular brands

SPEL Smart4house RE-00 Series, Installation And Operating Instructions Manual

Search results

Summary of Contents for Smart4house RE-00 Series

Reviews:

Related manuals for Smart4house RE-00 Series

Brands by name

Popular brands