PAGE 1 OF 2
S P E L L M A N H I G H V O LTA G E E L E C T R O N I C S C O R P O R A T I O N
HIGH VOLTAGE
MODULE
Spellman’s Bertan brand of 605C modular high voltage
power supplies offer well regulated, fixed polarity outputs
up to 20kV, which operate off a +28Vdc input (+24Vdc
optional). These fully enclosed modules are designed for
bench top or OEM applications like spectrometers, detec-
tors, imaging and electron beam usage.
The output voltage can be controlled by either a local
internal potentiometer or by a customer provided ground
referenced signal for remote operation. Additionally
ground referenced output voltage and current monitor
signals are provided. A high voltage enable
signal input allows remote control of the supply.
TYPICAL APPLICATIONS
Spectrometers
Detectors
SPECIFICATIONS
Input Voltage:
+28Vdc, ±10%, @ 0.75 amp
+24Vdc, ±10%, @ 1 amp (24V Option)
Output Polarity:
Positive or negative, specify at time of order
Output Voltage:
See “model ratings” table
Output Current:
See “model ratings” table
Voltage Regulation:
Line: ±0.001% of rated output voltage over specified
input voltage range
Load:±0.002% of rated output voltage for a full
load change
Ripple:
See “model ratings” table
Stability:
≤
0.01% per hour, after a 1/2 hour warm up
Accuracy:
Local control ±0.2%
Remote Programming ±(0.1% of s 0.1% of maximum)
Voltage Monitor ±(0.1% of r 0.1% of maximum)
Current Monitor ±(2% of r 1% of maximum)
Temperature Coefficient:
≤
50ppm/°C
Arc/Short Circuit:
All units are fully arc and short circuit protected and will limit
continuous short circuit output current to less than 110% of
maximum rated output current.
Operating Temperature:
0°C to +50°C
Storage Temperature:
-40°C to +85°C
Humidity:
20% to 85% RH, non-condensing
Interface Connector:
9 pin Molex connector, mating connector and pins provided
Output Connector:
59˝ (1.5 meter) detachable HV cable is provided
Cooling:
Convection cooled
Dimensions:
5.0˝H X 2.75˝W X 4.75˝D (128mm x 70mm x 121mm)
Weight:
≤
3.2 pounds (1.45kg)
Regulatory Approvals:
Compliant to 2004/108/EC, the EMC Directive and
2006/95/EC, the Low Voltage Directive.
605C
•
1-20KV @ 6-9 WATTS
•
DC INPUT MODULAR POWER SUPPLY
•
EXCELLENT REGULATION
•
VERY LOW RIPPLE
•
ARC/SHORT CIRCUIT PROTECTED
www.spellmanhv.com/manuals/600
Corporate Headquarters
Hauppauge, New York USA
+1-631-630-3000
FAX: +1-631-435-1620
e-mail: sales@spellmanhv.com
www.spellmanhv.com
128043-001
REV. F
Spellman High Voltage is an ISO 9001:2008 and ISO 14001:2004 registered company
For locations worldwide
