118142-001 Rev B
Page 63 of 104
5.5.21 Program Network Settings
Description:
The host requests that the firmware programs the network settings and
then reboots.
Application:
ARG 1
ARG2
ARG3
ARG4
ARG5
ARG6
Function
Device
Name
Remote
Address
Remote
Port
Subnet
Mask
Default
Gateway
MAC
Address
Direction:
Host to supply
Syntax:
<STX><51><,><ARG1><,><ARG2><,><ARG3><,><ARG4><,>
<ARG5><,><ARG6><,><ETX>
Arguments:
Device Name is limited to 20 characters or less. Remote address is a ip
address in dotted notation. Remote port is a decimal number. Subnet
Mask and Default Gateway are also dotted notation and MAC address is
in MAC Address notation.
ARG1: Device Name
1 character minimum, up to 20 maximum
ARG2: IP Address
<nnn><.><nnn><.><nnn><.><nnn>, where
<nnn> represents a number from 0 to 255.
ARG3: Remote Port
5001 or from 49152 to 65535.
ARG4: Subnet Mask
<xxx><.><xxx><.><xxx><.><xxx>, where
<xxx> represents a number from 0 to 255.
ARG5: Default Gateway <yyy><.><yyy><.><yyy><.><yyy>, where
<yyy> represents a number from 0 to 255.
ARG6: MACAddress
<zzz><:><zzz><:><zzz><:><zzz><:><zzz>
<:><zzz> , where <zzz> represents a number
from 0 to 255.
Example:
<STX>51,Spellman2.0,32.78.110.37,1026,255.0.0.0,192.168.1.1,0:100:33
:1:32:84,<ETX>
Response:
None, as Embedded server reboots with new settings.
Summary of Contents for DXM100 Series
