118159-001 REV. A
4 OF 7
This allows the user to set the initial ramp of voltage or current that will occur when the high voltage is
enabled. While at the main Features menu press the current encoder once to access the submenu.
Rotate the current encoder to highlight the Slow Start menu. Press the current encoder to select the
Slow Start menu. Rotate the current encoder to select kV Slow Start, mA Slow Start or Exit. The kV and
mA Slow Start can be set to a minimum of zero seconds and a maximum of 99.9 seconds. Once you have
selected the kV or mA Slow Start press the current encoder to move over to the time select menu.
Rotate the current encoder to set the desired time. Press the current encoder to revert back to the kV
Slow Start, mA Slow Start or Exit menu.
Tutorial
