LPX-200
Industrial Imaging System
4-1
Chapter 4: LPX-200 X-ray Controls & Indicators
Chapter 4:
LPX-200 X-ray Controls and Indicators
INTRODUCTION
The following paragraphs describe the controls and switches
on the control panel of the LPX-200 Control Unit. The
functions and use of these controls must be thoroughly
understood before operating the x-ray unit.
Overview - Control Unit
The Control Unit
’
s control panel is comprised of:
◆
2 liquid crystal display (LCD) screens
◆
exposure parameter pushbutton control switches
◆
a Mains power circuit breaker
◆
LED indicators
Military type connectors, along the right side of the panel, are
used to connect the input power cord and the system
’
s
interconnecting control cables and hoses.
Legend - LPX-200 Control Unit
Use the following legend as a reference for parts
identification.
1.
Exposure Technique LCD Display Screen
2.
Message / Mode LCD Display Screen
3.
Mains ON/OFF Circuit Breaker
4.
Mains LED Indicator
5.
Safety Key Lockout Switch
6.
kV UP/DOWN Pushbuttons
7.
mA UP/DOWN Pushbuttons
8.
EXPOSURE (Time/mAs) UP/DOWN Pushbuttons
9.
UNITS Select (Time/mAs) Pushbutton
10. TIME Counter Select Pushbutton
11. RESET Pushbutton
12. SCROLL Control
13. X-RAY ON Pushbutton
14. X-RAY OFF Pushbutton
Figure 4-1:
Legend - LPX-200 Control Panel
1
12
6
7
8
9
10
11
3
5
4
14
13
2