LPX-200
Industrial Imaging System
6-2
Chapter 6: LPX-200 Routine Upkeep and Care
Control Unit Checklist
❐
Cabinet and Cover _________ Paint finish in good condition;
Check for dents & visible damage;
Check for loose hardware.
❐
Cable Connectors _________ Firmly seated on front panel;
Check for bent or broken pins;
Check for corrosion or debris;
Check for cracked receptacles;
Check thread condition.
❐
kV and mA Controls _______ Check for cracked or broken
pushbuttons.
❐
Indicator Lamps __________ Illuminate when activated.
❐
Exposure Timer ___________ (+) and (-) buttons operate;
RESET button operates.
❐
Fan _____________________ Operates when power is applied.
❐
Air Filter ________________ Clean and secure.
Cooling Unit Checklist
❐
Coolant Level ____________ Radiator cap is easily removed;
Fluid level within 1/2" from top.
❐
Radiator * _______________ Check for cleanliness;
Check for dents, cracks or
damage.
❐
Hoses * _________________ Hose clamps firmly attached;
Check for cuts, cracks or dry rot.
❐
Drive Belt * ______________ Check for cracks or frayed areas;
Check for proper belt tension.
❐
Air Filter * _______________ Check for cracks, visible damage;
Check for cleanliness.
❐
Pump Assembly * _________ Rotates freely;
Check for signs of leakage.
❐
Motor and Fan * __________ Rotates freely;
Check for dents or cracks.
*
Remove Equipment Covers to perform inspection.
Interconnecting Cables & Hose Checklist
❐
Military Connectors _______ Secured firmly to cable;
Check for corrosion or debris;
Check for bent or broken pins;
Check for cracked or broken
housing.
❐
Cable Insulation __________ Check for cracks, holes or frays;
Check for signs of wear or dry rot.
❐
Hose Couplings ___________ Couplings secured firmly to hose;
Check for corrosion or blockage.
❐
Hoses ___________________ Check hoses for cracks, punctures;
Check for visible signs of leakage.
