118165-001 REV. A
475 Wireless Boulevard • Hauppauge, New York 11788, USA • www.spellmanhv.com • T:+1 631.630.3000 • F:+1 631.435.1620
66
4.5.5
Request Max Exposure Time
Description:
The host requests that the firmware report the maximum exposure
time. This is the maximum exposure time that can be set by the
“Set Exposure Settings” command, or “Set Exposure Time”
command. Note: Unless the “Set Max Exposure Time” Command
(Command = 40) has been sent this value will be the contents of
the Tube Table for the current exposure setting, assuming the
current exposure setting is valid.
Direction:
Host to supply
Syntax:
<STX><32><,><CSUM><ETX>
Response:
<STX><32><,><ARG><,><CSUM><ETX>
Where:
<ARG> = 0 - 20000 in ASCII format (time in milliseconds)
Example:
<STX>32 ,<CSUM><ETX>