118165-001 REV. A
475 Wireless Boulevard • Hauppauge, New York 11788, USA • www.spellmanhv.com • T:+1 631.630.3000 • F:+1 631.435.1620
10
4.0
Command Overview
Commands are separated into two modes: command and service modes.
Command mode is for normal operation and service mode for modifying
certain parameters and reading their value. Service mode commands are
not meant to be used as part of normal operation. They are intended for
system testing and unit servicing.
4.1 Command Mode Commands
Command Mode RS232 Commands
Command Name
<CMD>
<ARG>
RANGE
Request Analog Monitor
Readbacks
19
None
-
Request Status
22
None
-
Reset Faults
31
None
-
Set Exposure Settings
50
1-4 ASCII
See cmd
Get Exposure Settings
51
None
-
Set Exposure Time
72
1 ASCII
20-12000
Set Exposure kV
10
1 ASCII
0-4095
Set Exposure mA
11
1 ASCII
0-4095
Set Exposure Filament
73
1 ASCII
0-1
Set Exposure mAs
74
1 ASCII
1-6000
Request Exposure Time
Setpoint
52
None
-
Request Exposure kV
Setpoint
14
None
-
Request Exposure mA
Setpoint
15
None
-
Request Exposure
Filament Setting
53
None
-
Request Exposure mAs
Setpoint
54
None
-
Set HSS Speed
59
None
0 or 1
Request Fault Status
68
None
-