7
Changing the Unit of Measure, naming the
device, or setting a password.
1.
On the main screen of the app
(operation screen), select the Logger ID icon.
2.
Using the toggle keys, select the desired
Fahrenheit or Celsius temperature unit and
hPa or inHg scale for barometric pressure.
3.
Click in the gray ID box to name the device.
Naming the Device can provide a description
for all reports such as “warehouse temperature”
or “My datalogger.”
PROGRAMMING THE DEVICE
Once the device starts logging, you will not
be able to change the settings. Make sure
all parameters are set properly before
starting the device.
1.
Press POWER to turn the device on.
2.
Open the app on your smart phone and
connect to the device by pressing the serial
number in the upper left corner.
3.
The operations screen should display on
the main screen. If it does not, press the
serial number again.
