10
11
Recording Data
Note…
Most of the buttons on the meter are disabled during recording. All
settings must be selected before recording begins.
1. Press
REC
to begin recording the readings. If 64,000 readings have
been stored, “FULL” displays on the LCD.
2. Press
REC
to stop recording.
Note…
the meter will not record if battery power is extremely low.
Clearing Stored Data
1. Press
POWER
for 3 seconds to turn the meter
off
.
2. Press and hold
REC
.
3. Press
POWER
for at least 5 seconds while continuing to hold
REC
.
“CLr” displays to indicate that the data have been erased.
