12
Decimal Type
Although the decimal is commonly expressed as the “.”
symbol (i.e., 20.6 or 1000.53), some European countries
use a “,” symbol to represent the decimal (i.e., 20,6 or
1000,53). The meter defaults to the period symbol.
To adjust:
1. Enter the decimal type function from Setup Mode
(see page 11). “dEC” appears on the LCD.
2. Press ▲or ▼ to select Basic (.) or Euro (,).
Press
ENTER
to save the selection.
Auto Power Off
The meter automatically turns off after 10 minutes of
inactivity. To disable this function:
1. Enter the auto power off function from Setup Mode
(see page 11). “PoFF” appears on the LCD.
2. Press ▲or ▼ to select yes (auto power off enabled)
or no (auto power off disabled). Press
ENTER
to
save the selection.
Touch-Tone
1. Enter the touch-tone function from Setup Mode
(see page 11). “bEEP” appears on the LCD.
