17
Humidity and Temperature
1. Plug the probe plug into the probe input socket.
2. Press
POWER
to turn the meter
on
.
3. Press and hold
FUNC
to cycle through the
options until “rH” appears on the LCD. Release
the
FUNC
button.
4. The humidity value appears on the upper display
and the air temperature value appears on the
lower display.
Note…
To change the temperature unit, see page 13.
Type K/J Thermometer
Note…
The anemometer probe must be disconnected from the
meter to obtain accurate Type K/J readings.
1. Press
POWER
to turn the meter
on
.
2. Press and hold
FUNC
to cycle through the
options until “tP” appears on the LCD. Release
the
FUNC
button.
3. Plug a thermocouple temperature probe (type K or J,
optional) into the type K/J thermometer socket. The
LCD will display the measurement value from the
temperature probe.