background image

Sec. 1

DESCRIPTION

This exceptional 3-1/2 digit handheld, digital multimeter has the capacity of
reading up to 6 functions on up to 18 ranges. This DMM offers a powerhouse
of measurement capability in a small self-contained housing. It is designed for
the professional at work, in the field or in the laboratory. Yet simple enough to
operate, making it perfect for the hobbyist too.
Safety was prime consideration in the design of this DMM. Housed in shock
resistant ABS plastic, this instrument stands up to the use and abuse of every-
day service and electrically insulates the user from potential shock hazards.
Electronic overload protection against accidental application of voltage to
resistance and continuity circuits, combined with its rugged construction make
it a durable and reliable instrument.

Sec. 2

FEATURES

• Pocket-size
• Simple Operation
• 1000 hour battery life
• 10A DC/AC Range
• Recessed safety designed input terminals
• Built-in tilt stand
• Overload protection on all ranges
• Diode test function
• Non contact Voltage detection

Sec. 3

SPECIFICATIONS

Display:

3-1/2 digit LCD, 0.5" numerals, maximum reading
1999 with automatic sign and "      " annunciators.

Overrange 

Indication:

"1" most significant digit blinks.

Sampling Rate:

3 times per second.

Operating 

Environment:

5°C to 40°C (32°F to 104°F)

Relative humidity:

80% for temperatures up to 31 degrees C
Decreasing linearly to 50% relative humidity 
at 40 degrees C.

2

DM4400 04_06  5/3/06  1:10 PM  Page 5

Summary of Contents for DM-4400A






















Reviews: