3. Specification
3.1 Measuring Range & Accuracy (Accuracy guaranteed at 23ºC ± 5ºC, humidity <75%)
3.2 General Specification
• The maximum voltage allowed between terminal and ground: 600 VDC or 600 VAC
• Certifications and Compliance: Conforms to UL std. 61010-1, UL std. 61010-031, UL std. 61010-2-030, UL std.
61010-2-033, Certified to CSA std. C22.2 No. 61010-1, CSA std. 61010-031, CSA std. 61010-2-030, CSA std.
61010-2-033, CE, CAT III 600V
• Altitude: Maximum 2000m
• Display: 3-3/4-digit LCD, 3999 count
• Sampling time: 2 - 3 times / sec
• IP Degree: IP20
• Bluetooth Range: 10 Meters
• Automatic power off: 15 Minutes (Unless disabled)
• Battery type: (2) 1.5V LR44
• Operating temperature: 0˚C ~ 40˚C
• Storage temperature: -10˚C ~ 50˚C
• Size: 4.38" x 2.10" x 0.5" (111mm x 53mm x 12.7mm)
• Weight: 2.47 oz. (70 grams) (Including batteries)
3.3 Accessories
• 2 LR44 batteries
• CAT III 600V probe tip caps
4. Preparation for Measurement
4.1 Check the Condition of the Meter
Do no use a meter with visible signs of damage. Examine the meter housing before you use the product. Look for
cracks, missing plastic or exposed metal. Carefully examine the wire insulation. Pay close attention to where the
wire enters the meter and attaches to the probes.
4.2 Check the Battery Voltage
Press the select button to power the unit on. Confirm that the low battery symbol is not displayed on the LCD
screen. If the low battery symbol is displayed follow the instructions in Section 8, Battery Replacement.
SETTING
RANGE
RESOLUTION
ACCURACY
DC Voltage
400mV
100mV
±1.2%+3
4V
0.001V
±.8%+3
40V
0.01V
400V
0.1V
600V
1V
±1.2%+3
AC Voltage
4V
0.001V
±1.0%+5
40V
0.01V
400V
0.1V
600V
1V
±1.5%+5
Resistance
400
Ω
0.1
Ω
±1.5%+10
4k
Ω
0.001k
Ω
±.1.2%+6
40k
Ω
0.01k
Ω
±.1.0%+4
400k
Ω
0.1k
Ω
4M
Ω
0.001M
Ω
±.2.0%+4
40M
Ω
0.01M
Ω
TEMPERATURE COEFFICIENT
<.1 X (SPECIFIED ACCURACY)/°C
4
