7.7.7 Remarks
1. To add a comment about an individual data point press the blank space in the remark column.
2. The screen that appears will allow you to enter a comment.
3. Enter the comment and press “Back” to return to the previous screen.
4. Your comment will now be displayed in the “Remark” column .
7.8. Data File Sharing
7.8.1 Sharing as a Table
1. Open a file or record data.
2. Press the share symbol .
3. You will be prompted to save the file. (iOS only)
4. If you wish to change the name enter the new name and press “Save.” (iOS only)
5. If you wish to continue sharing with the default or previously assigned name just press “Save.” (iOS only)
6. You will be given the option to “Share data”, “Share picture” and “Cancel”.
7. Selecting “Share Data” will open allow you to share the data via a number of applications.
8. The data will be shared in .xml format.
7.8.2 Sharing as an Image
1. Open a file or record data.
2. Press the share symbol .
3. You will be prompted to save the file. (iOS only)
4. If you wish to change the name enter the new name and press “Save.” (iOS only)
5. If you wish to continue sharing with the default or previously assigned name just press “Save.” (iOS only)
6. You will be given the option to “Share data”, “Share picture” and “Cancel.”
7. Selecting “Share picture” will allow you to share the data chart via a number of applications.
CAUTION
•
Do not mix old and new batteries.
•
Install batteries in correct polarity as indicated in the Battery Compartment.
8. Battery Replacement
Replace the batteries when a low battery symbol is displayed on the LCD screen.
When the battery is completely exhausted, the display will appear blank and no symbol will be shown.
1. Press and hold the SELECT button until the unit powers off.
2. Remove the screw on the back of the unit with a small Philips head screw driver.
3. Remove the back cover.
3. Replace the batteries observing correct polarity.
4. Use new (2) LR44 1.5V batteries.
5. Reinstall the cover and replace the screw to secure the cover.
9. Maintenance
• Cleaning: Use only a soft cloth dampened with water or neutral detergent for cleaning the meter.
Do not use abrasives, solvents or harsh chemicals. Allow to dry thoroughly before use.
8
