background image

05

SPEX ARM & THIGH SUPPORT USER MANUAL

16

WWW.SPEXSEATING.COM

Recommended forward and rearward clear 
zones for wheelchair-seated occupants.  
(Note: the FCZ may not be achievable for 
wheelchair-seated drivers). 

Warning

EC

REP

BEO MedConsulting Berlin GmbH

Helmholtzstr, 2-9

10587 Berlin Germany
Tel: +49-30-318045-51

Medifab Ltd 

Phone +64 3 307 9790

Fax +64 3 307 2820

fasterresults@spexseating.com

www.spexseating.com

32 Detroit Drive  
Rolleston    7675 
New Zealand

US

REP

Medicept

200 Homer Ave, Ashland, MA 01721

United States

Tel: +1-508-231-8842

Warranty

Each Spex Arm & Thigh Support is carefully inspected to provide peak performance and is guaranteed to be free from defects in 
materials and workmanship for a period of 12 months from the date of purchase, provided normal use. Should a defect in materials 
or workmanship occur within 12 months from the original date of purchase, Medifab will, at its option, repair or replace it without 
charge. This warranty does not apply to general wear and use, including punctures, tears or burns, nor to the removable Thigh 
Support cover.

Claims and repairs should be processed through the nearest authorized Spex supplier. Except for express warranties made herein, 
all other warranties, including implied warranties of merchantability and warranties of fitness for a particular purpose are excluded. 
There are not warranties which extend beyond the description on the face hereof. Remedies for breach of express warranties herein 
are limited to repair or replacement of the goods. In no event shall damages for breach of any warranty include any consequential 
damages or exceed the cost of non-conforming goods sold. 

The serial number of your Thigh Support can be located by unzipping the Thigh Support Pad cover. The serial number of your Arm 
Support is located on the base of the Arm Pad. 

Summary of Contents for Arm & Thigh Supports

















Reviews: