05
SPEX ARM & THIGH SUPPORT USER MANUAL
5
WWW.SPEXSEATING.COM
Mounting to the Wheelchair
Seat rail mounting guide
Loosely fasten both of the stainless backing plates to the Seat Rail
mount and slide down the rail tube.
Once in position, tighten the fasteners.
1.
2.
Seat pan mounting guide
Slide the seat pan bracket underneath the seat pan, above the rail.
Insert one fixing stud through the Seat Pan wing, and one through
the Seat Pan as shown.
Fasten using the M6 washers and nuts.
Slide the bracket to the correct position and tighten using a 10 mm
spanner.
1.
2.
A
B
To adjust the height, loosen the four M6 fasteners with a 4mm Hex
Key and adjust the hip guide to the desired height by moving the
hole positions to achieve the right height.
Ensure all four fasteners are tightened up correctly once the support
pad is in position.
1.
Fixed Thigh support adjustment
2.
