05
SPEX ARM & THIGH SUPPORT USER MANUAL
7
WWW.SPEXSEATING.COM
To adjust the arm support height, loosen the four M6 fasteners with a
4mm Hex Key and adjust the arm support pad to the desired height.
These may need to move hole positions to achieve the right height.
Ensure all four fasteners are tightened up correctly once the arm sup-
port pad is in position.
Underneath the arm support pad, the outside fasteners allow for a
slight angle adjustment of the pad in relation to the arm support
post.
Further angle adjustment can be achieved by adjusting the Seat pan
mounting bracket angle when a Spex seat pan is installed.
2.
The inner fasteners underneath the pad allow for the forward and
back adjustment of the pad in relation to the arm support post.
3.
Arm support pads can be rotated to either offset the arm support
pad or allow for a wider position. Wider arm supports come with an
offset fastening hole for alternate positions.
4.
1.
Fixed Arm support adjustment
5.
