05
SPEX ARM & THIGH SUPPORT USER MANUAL
9
WWW.SPEXSEATING.COM
To adjust the height of a combination thigh and arm support beyond
the standard adjustment instructions laid out in previous guides, the
thigh support mounting plate may need to be shifted to the opposite
side of the armrest post.
Supplied additional M6 x 20mm fasteners and washers will be required
2.
1.
Combo Thigh & Arm support
adjustment
Remove the bottom four M6 x 16mm fasteners to remove the thigh
support from the post.
The top four M6 x 16mm fasteners may require shifting depending on
the arm support height required.
Remove the arm support to install the thigh support on the opposite
side of the post.
3.
Using the supplied M6 x 20mm fasteners and washers, fix the arm sup-
port to the inside of the post, with the thigh support attached to the
outside of post.
4.
