background image

05

SPEX BACK SUPPORT USER MANUAL

18

WWW.SPEXSEATING.COM

Warranty

Each Spex product is carefully inspected for performance and is guaranteed to be free from defects in 

materials and workmanship for a specified period from the date of purchase when used in normal 

conditions. Should a defect in materials or workmanship occur within this period, Spex will, at its discretion, 

repair or replace it without charge. 
This warranty includes hardware, foam padding, outer covers, incontinence cover and peripheral supports. 

This warranty does not apply to the general wear and use, including punctures, tears or burns or customer 

abuse of any of the components. 

Back Supports and Vigour, Spex and Flex Cushions

24 months

Dualtec Cushion, Seat Base and all other accessories

12 months

Claims and repairs should be processed through the nearest authorized Spex supplier. Except for express 

warranties made herein, all other warranties, including implied warranties of merchantability and 

warranties of fitness for a particular purpose are excluded. There are no warranties which extend beyond 

the description on the face hereof. Remedies for breach of express warranties herein are limited to repair or 

replacement of the goods. In no event shall damages for breach of any warranty include any consequential 

damages or exceed the cost of non-conforming goods sold.

Summary of Contents for Drop Mount Hardware





















Reviews: