05
FLEX CUSHION USER MANUAL
6
WWW.SPEXSEATING.COM
Cushion Contents
Your Cushion contains the following:
Description
Quantity
A Outer cover
1
B Incontinence cover
1
C Foam Unit
1
D Front Facing Wedges
1L & 1R
E Pelvic Obliquity Pads
Cushions up to 15” depth
5L & 5R
Cushions 16” depth and larger 6L & 6R
F Thigh Wedges
3L & 3R
G Abduction Wedges
2
H Abduction Wedge Cover
1
Once the user has finished using the Flex Cushion, it must be refurbished and thoroughly cleaned if it is
issued to another user. Below are the strict guidelines for refurbishing the Flex Cushion. Medifab takes no
responsibility for contamination, cross infection, or damage. Medifab recommends using AHP (Accelerated
Hydrogen Peroxide) disinfectant wipes. The disinfection product must be used as per the manufacturer
instructions. Medifab takes no responsibility for the effectiveness of the disinfecting process.
Re-issuing to Another User
Part
Procedure
Safety check
All components to be checked for signs of stress or
cracking.
Upholstery
covers
Both the incontinence cover and outer cover must be
replaced regardless of condition.
Strategic
positioning
Wedges & Pads
Ensure correct number of wedges and pads are supplied
and all Velcro’s are in good condition.
Foam
Foam should be checked for degradation and
cleanliness.
A
B
C
G & H
E
D
F
Disposal & Recycling
Your Spex Seating System is manufactured using a variety of materials, of which most can be recycled.
Once it reaches the end of its life, if you are the legal owner, do not dispose of as ordinary household
waste but take your Flex cushion to an approved recycling or collection point, to dispose of according to
local laws and regulations.
Separate collection and recycling of the Spex System when disposing ensures protection of the environ-
ment and assists with natural resource conservation.
