USER MANUAL
Page
11
Quick Start Guide
•
Be certain that the battery is fully charged and properly installed in the camera;
•
Power on the
RAZ-IR
thermal camera;
•
Flip open the top half of the
RAZ-IR
thermal camera to view the display screen;
•
Wait for 15 seconds and remove the lens cap;
•
Non-uniformity Correction (NUC) is performed automatically when the camera is
powered on;
•
Point the
RAZ-IR
thermal camera at any object to be analyzed;
•
Use the lens focal ring and adjust the focus to get a clear image on the display;
•
Press the
•
Key
for three seconds to switch between Auto and Manual modes;
•
Press
•
Key
and then adjust brightness, contrast and color palette, if necessary;
•
Press
the
◄
Key
to display and view a visual image of the target;
•
Press the
◄
Key
to return to the live thermal image;
•
Press the
OK Key
to freeze and capture the live image;
•
Press the
OK Key
again to save and store the frozen image;
•
Press the
C Key
to resume live imaging.
