USER MANUAL
Page
17
•
Analysis Spot:
Allows up to four spot measurements to take place on saved or
frozen images.
•
Analysis Line:
Allows line profile measurement to take place on saved or frozen
images
•
Analysis Area:
Allows up to four rectangular area measurements to take place on
saved or frozen images, displaying maximum, minimum and mean temperatures.
•
Analysis Isotherm:
Allows for an isotherm to be placed on live, saved or frozen
images.
•
To exit the menu system at any time and return to the image press
C Key.
Switching Between Infrared Image and Visual Image
•
You can toggle between the infrared image and visual image
•
When there is no menu on display screen, press the
◄
Key
to switch between
thermal and visual images.
•
For replayed images, press the
OK Key
to switch between infrared image and visual
image.
Adjusting the Exposure and Gain of the Visual Image
•
There are two modes available - Auto Mode and Manual Mode.
•
Press
•
Key
to switch between Auto Mode and Manual Mode. The current mode is
displayed in the left corner at the bottom of the display screen.
•
In Manual Mode, exposure control (EC) and gain control (GC) is available on the
screen.
•
Press the
▲
or
▼
Keys
to adjust the value of the highlighted item and press
►
Key
to shift between EC and GC.
•
In Auto mode, EC and GC will be defined automatically by the system.
Laser Locator
•
To turn on the laser locator option, press the
M Key
to display the main menu. Press
the
▲
,
▼
,
◄
or
►
Keys
to highlight the “Setup Analysis” option. Select by
pressing the
M or OK Keys.
•
Under the heading named “Laser”, you can toggle between “on” and “off” by pressing
the
◄
and
►
Keys
. The selection “on” is confirmed by pressing the
M or OK Keys
.
•
When there is no menu on the display screen, press the
▲
Key
to turn the laser on