USER MANUAL
Page
28
•
Press the
M
or
►
Keys
to enter the “Analysis” menu. Press the
▼
Key
to highlight
and select “Area”, then press the
M
or
OK Keys
.
•
Areas A, B, C, and D will appear. Four corresponding temperatures will be shown
respectively at the top of the screen as well as the temperature measurement type,
Minimum, Mean or Maximum.
•
To position and move the rectangular measurement areas, press the
▲
,
▼
,
◄
or
►
Keys
to move area “A” to the desired position. Press the
M Key
to position and
move area “B” and press the
▲
,
▼
,
◄
or
►
Keys
to move area B to the desired
position. Repeat this procedure until all areas are in the desired position.
•
To change the size of the rectangular measurement areas, press the
▲
,
▼
,
◄
or
►
Keys
to select area “A”, then press the
•
Key. Press the
▲
and
►
Keys
to
enlarge the area and the
▼
and
◄
Keys
to reduce the area. Press the
•
Key to
confirm the new size. Press the
M Key
to move to area “B” and repeat the procedure
above to adjust this area. Repeat this procedure for all areas.