USER MANUAL
Page
5
•
The
RAZ-IR
thermal camera incorporates precision optical equipment and
static-sensitive electronics which should be protected from shock and vibration at all
times.
•
Do not cover, impede or otherwise block the air ventilation ports on the
RAZ-IR
thermal camera body.
•
Do not attempt to open the camera body as this action will void the manufacturer’s
warranty.
The
RAZ-IR
thermal camera is powered by a Lithium Ion (Li-Ion) rechargeable battery
pack. The following safety precautions must be adhered to at all times to ensure the safe
use of this equipment:
•
Do not disassemble or attempt to open these batteries under any circumstances.
•
Do not expose these batteries to fire or other high temperature sources.
•
Do not short circuit these batteries intentionally or inadvertently by allowing metal
objects to come into contact with the battery terminals.
•
Do protect the batteries from water and other sources of moisture.
•
The batteries should only be charged using the recommended and supplied charging
device.
Maintenance
To ensure that the
RAZ-IR
thermal camera is kept in good working condition and remains
fully operational, the following guidelines should be adhered to at all times:
Non-optical surfaces
The non-optical surfaces of the camera can be cleaned, when required, with a soft cloth
dampened with water and a mild detergent.
Optical surfaces
The optical surfaces of the camera lens should only be cleaned when visibly dirty. Care
should be taken to avoid touching the exposed lens surface because skin acid left behind
from fingerprints can be damaging to coatings and lens substrates. Use only a proprietary
lens cleaning tissue when necessary.
Calibration and Repair
To ensure the accuracy and reliability of the
RAZ-IR
thermal camera, it is highly
recommended that the instrument be calibrated annually.
